Home Server Sanity Check

[sydude]

Putting together a home Server where I will be running several VM's and continually adding VM's on it up to maybe 8 VM's...Here is what I'm looking at:

Cabinet - Rosewill RSWM-12U001 12U 450mm Deep Single Section Wall Cabinet, Toughened Front Glass Door and Solid Side Panels with Lock

Chassis - Chenbro Micom 4U RM 26-Inch 6G miniSAS BP Tylersburg (RM41300-F2)

Motherboard - ASRock EP2C602-4L/D16 SSI EEB Server Motherboard Dual LGA 2011 Intel C602 DDR3

Memory - 64GB 4X16GB DDR3 1600MHz ECC REG MEMORY FOR ASRock EP2C602-4L/D16 SSI EEB

CPU - 2x XEON 2670

PSU - CORSAIR RMi Series, RM850i, 850 Watt, 80+ Gold Certified, Fully Modular - Digital Power Supply

SSD - Samsung 860 EVO 500GB 2.5 Inch SATA III Internal SSD (MZ-76E500B/AM)

CPU coolers - 2x Cooler Master Hyper 212 EVO

Im a bit nervous on the PSU fitting the case, as well as the chassis fitting the cabinet, I also have a couple other units to rack (w: 17.0″, d: 12.0″, h: 1.73″) that will need to fit along side it. I've never owned or operated an IT rack so any advice would be appreciated. Just wanted to get some ideas on the build maybe small tweaks etc. and double check compatibility.

 

[kanewolf]

You marked your previous thread "solved" and then created a new one. But didn't choose to pay attention to the info I provided. You don't want 4x16GB ram with two CPUs. You want 8x8GB. You want multiples of 4 DIMMs per socket.

I will just say "good luck" ...