Homebuilt PC crashes after couple of minutes


Dec 8, 2012
Hi folks,

I have a homebuilt system on ITX basis:
- MS-Tech MC-80BL with 60W external power supply
- Asus E45M1-DELUXE AMD Hudson M1
- 1 TB SATA harddrive
- 120 GB SSD
- 4 GB Kingston 1333 Mhz DDR3


unfortunately the system crashes a couple of minutes after a cold start (bluescreen with memory dump). After that the system runs stable for days (literally, I tested it) even under high load. It's not the RAM, I exchanged it (I had two bars). I bought the SSD later and reinstalled Windows, so it's not the hard drive nor a software problem. That leaves the mainboard or the power supply. The power supply is mainly an external 60W with some internal parts, see here:


Does it look broken? Do you think 60W are not enough fo the AMD Hudson?

These are the voltages from CPUID:

Hardware monitor ITE IT8772
Voltage 0 1.12 Volts [0x5D] (CPU VCORE)
Voltage 1 2.22 Volts [0xB9] (VIN1)
Voltage 2 2.95 Volts [0xF6] (+3.3V)
Voltage 3 2.76 Volts [0x89] (+5V)
Voltage 4 8.88 Volts [0xB9] (+12V)
Voltage 5 -11.76 Volts [0xF5] (-12V)
Voltage 6 -8.88 Volts [0xB9] (-5V)
Voltage 7 2.84 Volts [0x8D] (+5V VCCH)
Voltage 8 1.66 Volts [0x8A] (VBAT)
Temperature 0 53°C (127°F) [0x35] (TMPIN0)
Temperature 1 40°C (104°F) [0x28] (TMPIN1)
Fan PWM 0 0 pc [0x0] (FANPWM0)
Fan PWM 1 0 pc [0x0] (FANPWM1)
Fan PWM 2 0 pc [0x0] (FANPWM2)

Hardware monitor AMD ADL
Voltage 0 0.86 Volts [0x35F] (VIN0)
Temperature 0 61°C (141°F) [0x3D] (TMPIN0)

Any input is appreciated.