- Dec 18, 2016
- 2
- 0
- 1,510
Hello! First of all, thank you for anyone who replies to my question. I'll be explaining everything but it's going to be long, please bear with me.
My computer has a 250 GB SSD , 1 Gb of RAM, it's old, i know. Intel Pentium E5200 Processor 2.50 GHz.
I low level formatted my disc after having windows XP installed. I wanted to have windows 7.
I got 5 different windows ultimate 32 bits installation discs. 2 different USB sticks, with 2 different ISO images.
With all different installations and after low level formatting the disc after each failed installation, I was fed up. In all installations, the same mistake. It restarts after expanding windows files and then it gives me an error, saying that the installation was interrupted and that i have to start again or reboot to continue.
So i searched for a solution, which worked. I had to open cmd, open regedit and change a value from 1 to 3. I did it, and then always began to finish the installation properly. All good, my computer would start and I would try to install the drivers i got with my PC disc. I would restart my computer and then bam, a reboot loop. So I was angry the first time. I went, low level formatted my pc, and decided that I should install it again with a different DVD, then avoid the drivers installation part so I could tell if that was the issue or not.
It was giving me the same problem during installation, then an infinite boot loop again, wouldn't even start, it just reboots itself.
I disabled rebooting after system failure, all the same. I tried starting it on safe mode and it wouldn't do it either way. So I inserted the DVD once more and went to the repair options and do as other solutions said on many forums and pages like this one.
I used cmd to get the mbr fixed, chkdsk, I ran memtest to check if the ram was failing and it said it was all good. Checked motherboard myself to see if there was something wrong about any cables, something loose or if it was dirty but nothing was wrong.
Then, I went to use my hiren's boot CD, loaded mini windows XP and tried to fix it with cmd again. I got an error saying
"failed to transfer logged messages to the event log with status 50"
and again, I tried a good solution, which was doing it from the moment my computer booted up. I did, still didn't fix my problem at all.
I checked from bad clutters on my disc and nothing came up, it's doing good so far, but I'm getting angry at how I don't know what's wrong with my computer.
¿Can I have some guidance on this matter? Because I know the power supply is doing good and the motherboard is intact.
Thank you all in advance.
My computer has a 250 GB SSD , 1 Gb of RAM, it's old, i know. Intel Pentium E5200 Processor 2.50 GHz.
I low level formatted my disc after having windows XP installed. I wanted to have windows 7.
I got 5 different windows ultimate 32 bits installation discs. 2 different USB sticks, with 2 different ISO images.
With all different installations and after low level formatting the disc after each failed installation, I was fed up. In all installations, the same mistake. It restarts after expanding windows files and then it gives me an error, saying that the installation was interrupted and that i have to start again or reboot to continue.
So i searched for a solution, which worked. I had to open cmd, open regedit and change a value from 1 to 3. I did it, and then always began to finish the installation properly. All good, my computer would start and I would try to install the drivers i got with my PC disc. I would restart my computer and then bam, a reboot loop. So I was angry the first time. I went, low level formatted my pc, and decided that I should install it again with a different DVD, then avoid the drivers installation part so I could tell if that was the issue or not.
It was giving me the same problem during installation, then an infinite boot loop again, wouldn't even start, it just reboots itself.
I disabled rebooting after system failure, all the same. I tried starting it on safe mode and it wouldn't do it either way. So I inserted the DVD once more and went to the repair options and do as other solutions said on many forums and pages like this one.
I used cmd to get the mbr fixed, chkdsk, I ran memtest to check if the ram was failing and it said it was all good. Checked motherboard myself to see if there was something wrong about any cables, something loose or if it was dirty but nothing was wrong.
Then, I went to use my hiren's boot CD, loaded mini windows XP and tried to fix it with cmd again. I got an error saying
"failed to transfer logged messages to the event log with status 50"
and again, I tried a good solution, which was doing it from the moment my computer booted up. I did, still didn't fix my problem at all.
I checked from bad clutters on my disc and nothing came up, it's doing good so far, but I'm getting angry at how I don't know what's wrong with my computer.
¿Can I have some guidance on this matter? Because I know the power supply is doing good and the motherboard is intact.
Thank you all in advance.
Facebook
Twitter
Instagram