Question How can I connect the front panel connectors to Asus Prime h310m-k?

May 30, 2019
13
0
10
I've got it, I put the reset button instead of the power one, and the power one and the power led didn't inster and it is booting, but it's a boot loop, and i have connected the VGA from my monitor, and there is not shown any image. What can it be? It runs for like 5 seconds, and it is restarting
 
May 30, 2019
13
0
10
1. A 3-pin connector with only two wires, the third pin is a FAKE pin so you can't plug in the connector the wrong way.

2. A 3-pin LED, is a LED with 2 lights in one bulb, typically one light signals ON, second light signals SLEEP/Standby.
There are just 2 pins left for the led, and the middle one pin is fake...
 

Satan-IR

Splendid
Ambassador
Those connectors should be 'horizontal' not vertical. You should connects pins on same row with those connectors as shown in that pin layout I posted. Are you sure you connected them all correctly?

To deal with the 0x0000007b error, when you press power button and the system POSTs press F8 button and hold it down.

Advanced Boot Options screen appears and you can use the arrow keys to highlight Last Known Good Configuration (advanced) and then press Enter.

I hope Windows starts normally.