Question How can I fix RAM causing PC to boot loop when I set it at it’s rated speeds?

[Silence0000]

Specs:
MB: Asus Prime x570-Pro
CPU: Ryzen 7 2700x
GPU: 1060 6gb
RAM: Corsair Vengeance RGB Pro(3600 MHz 32gb)
PS: EVGA 850
I have tried manually entering my timings this does not work either. Also, whenever I enable my D.O.C.P. Profiles it causes a boot loop as well any tips?
Normally, it causes my PC to boot to safe mode after around 2-3 cycles.
If you need more info please let me know I’ve had this problem for around a year now with no fix.

 

[RARRAF]

the ram is installed in the correct dual channel configuration on the motherboard i.e. slots 1 and 3 or 2 and 4

 

[sizzling]

Although in theory it should work I have seen many people complain they cannot get their RAM stable above 2933/3000mhz on 2000 series CPU’s.

 

[Silence0000]

Okay I will try to set my speeds at just a bit lower like 3200 MHz. Also, to respond to the guy before i have 4 x 8 Gb sticks they take up all my DIMM slots.

 

[sizzling]

Okay I will try to set my speeds at just a bit lower like 3200 MHz. Also, to respond to the guy before i have 4 x 8 Gb sticks they take up all my DIMM slots.

Oh running 4 dimms increases the chance of having issues hitting higher speeds. It’s recommended to keep to 2 dimms if possible on consumer hardware.

 

[Silence0000]

Whenever I try to set up my rgb sometimes if I set them as a static color sometimes they change the incorrect ones. Could this be because they are numbered and have to be put into the right order? Don’t know if this could also cause issues.