How can I overclock FSB or change settings on EP35-DS3R?

72ogerrabbit

Distinguished
Jan 12, 2009
3
0
18,510
0
I have updated my bios and everything but I still can't find an option to overclock my fsb. I even tried doing ctrl and f1 but all that lets me do I devoltage fsb and ram. Please tell me where the setting is in bios to overclock fsb.
 

bilbat

Splendid
First, you want to go to the Advanced BIOS Features page, and set the following:

Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

Then, on the MB Intelligent Tweaker (M.I.T.) page, set these:

Robust Graphics Booster___________ [Auto]
CPU Host Clock Control_ [Enabled] (this one allows you to change the CPU/FSB clock...)
PCI Express Frequency (Mhz)_______ [100] << ALWAYS SET TO 100, NOT 'auto', especially for overclocking
C.I.A. 2__________________________ [Disabled]
DRAM Timing Selectable_______ SPD __ [Manual] (this one allows you to change the RAM clocking/latencies...)
Performance Enhance = [Standard]
System Voltage Control____ [Manual]

And, on Integrated Peripherals:

Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

If it boots and runs, boot up MemTest86+ (which you can find here):
http://www.memtest.org/#downiso
 

Similar threads


TRENDING THREADS