[SOLVED] How can I rotate a tower cpu cooler?

rostamiani

Distinguished
Nov 24, 2008
19
0
18,510
Hi
We bought some cases with Silverstone KR-02 coolong tower. The problem is that when installed, the direction of airflow is from bottom to the top, just bellow the power supply!!!
How can I rotate it 90 degrees to push hot air out of the case?

This is an image of inside the case:

IMG_20201011_124528.jpg.da54fa57b7d75faee85344c789bd2a87.jpg


This is the items with the fan:

silverstone-krypton-kr02-2.jpg
 
Last edited:
Solution
Is it a problem? It isn't SPECIFICALLY "a problem", but I wouldn't leave it like that. If you intend to install a graphics card then that heat is going to be directly sucked into the CPU cooler, lowering it's performance and efficiency. And even if no graphics card is intended to be used, you are directly forcing hot air into your power supply which is likely going to further decrease the lifespan of a power supply that is already a poor quality product to begin with.

The end result is, you are going to get poor CPU cooler performance and an even shorter PSU lifespan, neither of which is really necessary when you can simply turn the cooler without a major investment in effort. Additionally, having the air coming through the heatsink...

rostamiani

Distinguished
Nov 24, 2008
19
0
18,510
There is only ONE way to rotate the cooler, and that is to uninstall it, and move both the brackets and the cooler 90 degrees, then reinstall them. That will require that you clean off all the existing thermal paste from both surfaces and apply new paste.
Thanks
Is the brackets of LGA 1200 square?
I'm afraid if they are not complete symmetric and rotation fail!
 
Is it a problem? It isn't SPECIFICALLY "a problem", but I wouldn't leave it like that. If you intend to install a graphics card then that heat is going to be directly sucked into the CPU cooler, lowering it's performance and efficiency. And even if no graphics card is intended to be used, you are directly forcing hot air into your power supply which is likely going to further decrease the lifespan of a power supply that is already a poor quality product to begin with.

The end result is, you are going to get poor CPU cooler performance and an even shorter PSU lifespan, neither of which is really necessary when you can simply turn the cooler without a major investment in effort. Additionally, having the air coming through the heatsink get sucked directly out the back of the case by that rear case fan would be a lot more effective for the CPU cooler AND the whole internal case temp.
 
Solution