How do i factory reset Sagemcom model 2704n?

[lpdr0k]

I have a Sagemcom router/modem, model 2704n

and I am looking for the way to factory reset said device

Thanks in advance

p.s. please feel free to move my question to a more appropriate category 😀

 

[woodson75]

On the back, next to the Ethernet ports, should be a little hole with the word "Reset" below it. Stick the nib of a pen in there and hold for a few seconds.

This shows where the reset button is: http://imgur.com/a/ZY6Ru

 

[lpdr0k]

On the back, next to the Ethernet ports, should be a little hole with the word "Reset" below it. Stick the nib of a pen in there and hold for a few seconds.

This shows where the reset button is: http://imgur.com/a/ZY6Ru

Hey thanks for sparing the time to address my problem,

But is there a specific case that should be met before I perform a hard reset?

Because I am aware of this button, and I have already tried resetting (holding the button down) for 10, then 40, then 90 seconds and I still got no password reset

But as I did this, there was a device connected via wi-fi to my modem/router,

Should I disconnect everything before trying to perform a hard reset?

Or is there a specific case that should be met before I reset?

 

[woodson75]

Some older routers may require you to turn off the router first, then hold down the reset button and then turn the router back on.

According to the manual: "This button allows the router to be reset to the initial configuration. Hold reset button 20 seconds to configure to initial configuration. Note: This operation deletes the entire personalized configuration of your router: Password, Configuration, etc."

 

[lpdr0k]

Some older routers may require you to turn off the router first, then hold down the reset button and then turn the router back on.

According to the manual: "This button allows the router to be reset to the initial configuration. Hold reset button 20 seconds to configure to initial configuration. Note: This operation deletes the entire personalized configuration of your router: Password, Configuration, etc."

I didn't need to turn it off, I did disconnect all devices from the router though, seems that enabled me to actually reset it

thanks