Question How do i get disk checker to stop coming up everytime i boot up my pc

Can you cancel the check before it starts and boot into Windows?

While in Windows, Press Windows+X and select Command Prompt (Admin) to open Elevated Command prompt.

Type (or copy&paste) the following command:
Code:
chkntfs /x С:

Windows scheduling the disk check and it freezing strongly indicates problems with your hard drive or Windows installation. You might wanna do a check with another software. That way you'll make sure whether it's hard disk or Windows. In case it's the hard disk, you should think about replacement before it fails to the point where you're unable to access your data.

Download Victoria, professional disk test utility. Unzip and run Victoria.exe 'as admin' (right click --> run as administrator)

Make sure your system disk is selected in the window on the right
victoria-mid-2.png


Select 'SMART' tab and click 'GET SMART' (self-monitoring, analysis and reporting technology)

Make a screenshot and upload it here.

Next important test is the disk read test. It might take hours to complete, so show us the previous test results, then leave your PC to run the next test at your convenience.
Go to 'Tests' tab. Select 'Verify' in the window on the right. Click 'Start'.
Post results.
 
Apr 15, 2019
22
0
10
Can you cancel the check before it starts and boot into Windows?

While in Windows, Press Windows+X and select Command Prompt (Admin) to open Elevated Command prompt.

Type (or copy&paste) the following command:
Code:
chkntfs /x С:

Windows scheduling the disk check and it freezing strongly indicates problems with your hard drive or Windows installation. You might wanna do a check with another software. That way you'll make sure whether it's hard disk or Windows. In case it's the hard disk, you should think about replacement before it fails to the point where you're unable to access your data.

Download Victoria, professional disk test utility. Unzip and run Victoria.exe 'as admin' (right click --> run as administrator)

Make sure your system disk is selected in the window on the right
victoria-mid-2.png


Select 'SMART' tab and click 'GET SMART' (self-monitoring, analysis and reporting technology)

Make a screenshot and upload it here.

Next important test is the disk read test. It might take hours to complete, so show us the previous test results, then leave your PC to run the next test at your convenience.
Go to 'Tests' tab. Select 'Verify' in the window on the right. Click 'Start'.
Post results.




WDC WD10EZEX-08M2NA0 WD-WCC3FPWU24EU
-------------------------------------------------------------------------
ID Name Value Worst Tresh Raw Health
-------------------------------------------------------------------------
1 Raw read error rate 200 200 51 1858 •••••
3 Spin-up time 176 169 21 2183 •••••
4 Number of spin-up times 95 95 0 5687 ••••
5 Reallocated sector count 200 200 140 0 •••••
7 Seek error rate 200 200 0 0 •••••
9 Power-on time 82 82 0 13426 ••••
10 Spin-up retries 100 100 0 0 •••••
11 Recalibration retries 100 100 0 0 •••••
12 Start/stop count 98 98 0 2643 ••••
192 Power-off retract count 200 200 0 101 •••••
193 Load/unload cycle count 199 199 0 5593 •••••
194 HDA Temperature 114 100 0 29°C/84°F ••••
196 Reallocated event count 200 200 0 0 •••••
197 Current pending sectors 200 200 0 80 •••••
198 Offline scan UNC sectors 200 200 0 79 •••••
199 Ultra DMA CRC errors 200 200 0 0 •••••
200 Multi zone error rate 200 200 0 86 •••••
 
Apr 15, 2019
22
0
10
Can you cancel the check before it starts and boot into Windows?

While in Windows, Press Windows+X and select Command Prompt (Admin) to open Elevated Command prompt.

Type (or copy&paste) the following command:
Code:
chkntfs /x С:

Windows scheduling the disk check and it freezing strongly indicates problems with your hard drive or Windows installation. You might wanna do a check with another software. That way you'll make sure whether it's hard disk or Windows. In case it's the hard disk, you should think about replacement before it fails to the point where you're unable to access your data.

Download Victoria, professional disk test utility. Unzip and run Victoria.exe 'as admin' (right click --> run as administrator)

Make sure your system disk is selected in the window on the right
victoria-mid-2.png


Select 'SMART' tab and click 'GET SMART' (self-monitoring, analysis and reporting technology)

Make a screenshot and upload it here.

Next important test is the disk read test. It might take hours to complete, so show us the previous test results, then leave your PC to run the next test at your convenience.
Go to 'Tests' tab. Select 'Verify' in the window on the right. Click 'Start'.
Post results.

KINGSTON SV300S37A120G 50026B774701C24C
-------------------------------------------------------------------------
ID Name Value Worst Tresh Raw Health
-------------------------------------------------------------------------
1 Raw read error rate 95 95 50 9356324 ••••
5 Reallocated sector count 100 100 3 0 •••••
9 Power-on time 89 89 0 267868520327402 ••••
12 Start/stop count 98 98 0 2072 ••••
171 Program fail block count 100 100 0 0 •••••
172 Erase fail block count 100 100 0 0 •••••
174 Unexpected power loss count 0 0 0 100 special
177 Wear leveling count total 0 0 0 96 special
181 Program Fail Count (Total) 100 100 0 0 •••••
182 Erase Fail Count (Total) 100 100 0 0 •••••
187 Uncorrectable Errors 100 100 0 0 •••••
189 High Fly writes 29 42 0 60132294685 •
194 HDA Temperature 29 42 0 29°C/84°F ••••
194 Minimum temperature 90 42 0 42°C/107°F -
194 Maximum temperature 90 42 0 14°C/57°F -
195 Hardware ECC recovered 120 120 0 9356324 •••••
196 Reallocated event count 100 100 3 0 •••••
201 Off-track errors count 120 120 0 9356324 •••••
204 Soft ECC corrections Count 120 120 0 9356324 •••••
230 GMR head amplitude 100 100 0 100 •••••
231 HDA Temperature 98 98 10 0°C/32°F ••••
233 Power-On Hours 0 0 0 17568 special
234 Average erase count and maximum erase Count 0 0 0 18951 special
241 Total writes Gb 0 0 0 18951 special
242 Total LBA read 0 0 0 10794 special