Question How do I get my external back?

[Beachhead1985]

I said I'd be back and after trying the three things I know how to do; I am!

So, short version: I had a drive crash and everything I tried to fix it failed. Now my external doesn't work.

Part of this was running OpenSuperClone, trying to mirror my damaged drive onto a new external drive (WD Easy Store). With a trip coming up and not being keen on leaving it running at 165+ days to go in the time left bar, I aborted the operation, leaving a partial mirror on my external. OSC led me to believe that it's program allowed this as a come-back option; so I could come back later and pick up where I left off if I wanted.

Problem: Cannot view the external on my PC, laptop or OSC's Linnux OS. Does not even appear as an option. My DVD drive reads as blank w/o a disc, this isn't the same thing.

It still shows up in my eject options, but I couldn't fix it through mapping a network drive, adding a network location or any tools I know in disc management (where it also does not show up).

Can someone tell me what to do here?

Thank you.

Gigabyte GA-F2A78M-D3H motherboard w. 32gb ram
AMD A6-6400K APU with Radeon
NVIDIA GeForce GTX 1660 Super
Win 10

 

[logainofhades]

The drive doesn't even show up in Disk Management?

 

[Misgar]

Can someone tell me what to do here?

Presumably you can't restore the files from alternative backup locations and this disk contained your only copy.🙁

If so and the data is vital, consider spending big bucks and take the drive to a professional recovery agency. They may offer to investigate the problem for free, then tell you how much it will cost and the chances of success.

They may have to source an identical donor hard disk and swap the platters out of your dead drive into their working drive in a special clean room. This all adds to the cost if your drive's read/write heads, actuators, motor, pcb, etc., have failed.

 

[Beachhead1985]

The drive doesn't even show up in Disk Management?

I feel like an idiot, but after a restart, now it is. Can't explain it. There is just one more disk showing this time than when I booted it up the other day.

Options here aren't familiar to me though.

I can convert it to a dynamic disk, format it, delete the healthy volume or make a new simple volume from the unallocated part.

 

[faalin]

I can convert it to a dynamic disk, format it, delete the healthy volume or make a new simple volume from the unallocated part.

You do any of that and you will loose all data on the drive.

What kind of drive is it? Is there an option to remove it from the external case and plug it in internally. It very well could be the external caddie that went bad.

 

[Beachhead1985]

You do any of that and you will loose all data on the drive.

What kind of drive is it? Is there an option to remove it from the external case and plug it in internally. It very well could be the external caddie that went bad.

I've given up on the data. it's a partial image from a crashed drive that I don't have 165 days to let it complete.

I don't think I could shuck it without wrecking the case and I'd rather keep it as external to use as my external backup drive.

 

[Misgar]

I don't think I could shuck it without wrecking the case

It's probably a sensible option to leave well alone if the disk's still under warranty, but it is sometimes possible to shuck a drive without breaking the fragile tabs. You have to know where to fit the spudger.
https://www.ifixit.com/Guide/How+to+Shuck+a+WD+Elements+External+Hard+Drive/137646