How do i know where to plug in each psu cord?

[TheObserver]

Are they labeled or only match up to certain places? I'm going to put a new one in soon and was worried i wont know where to plug each cord in..

 

[turkey3_scratch]

Have you been reading guides on how to build a PC?

 

[TheObserver]

Have you been reading guides on how to build a PC?

uhh watched a video, never read up on details

 

[rgd1101]

Should come with a manual.

 

[USAFRet]

Have you been reading guides on how to build a PC?

uhh watched a video, never read up on details

The user manual is your friend.

 

[turkey3_scratch]

Have you been reading guides on how to build a PC?

uhh watched a video, never read up on details

Then how did you even get to the point at which you are plugging cables in? Have you installed the CPU and RAM yet?

This guide is helpful http://www.tomshardware.com/forum/274745-31-step-step-guide-building

 

[TheObserver]

Have you been reading guides on how to build a PC?

uhh watched a video, never read up on details

Then how did you even get to the point at which you are plugging cables in? Have you installed the CPU and RAM yet?

This guide is helpful http://www.tomshardware.com/forum/274745-31-step-step-guide-building

Did you not read my original post? I'm putting a new one in soon. I'm upgrading my current pc, just changing psu and gpu

 

[rgd1101]

Have you been reading guides on how to build a PC?

uhh watched a video, never read up on details

Then how did you even get to the point at which you are plugging cables in? Have you installed the CPU and RAM yet?

This guide is helpful http://www.tomshardware.com/forum/274745-31-step-step-guide-building

Did you not read my original post? I'm putting a new one in soon. I'm upgrading my current pc, just changing psu and gpu

probably just like you, don't like reading. just like watching the movie.

 

[Isleepalot]

psu in easy to install. Start with the 20 or 24 pin connector and plug into the motherboard. There is only one port big enough for that and only goes on one way, you can't mess that up. Next you need the 4 or 6 or 8 cpu pin connector that goes onto the board. Depends on the psu and mb you have for which pin number the cpu plug in is. Then you connect sata power cable to all your drives as it will match up and can only go on a drive. Then you have a gpu connector which you might be able to confuse with the cpu connector but not really sense that cord will be split into 2 different amounts of pin connectors where as the cpu one is just one cord. That is it.

 

[turkey3_scratch]

Have you been reading guides on how to build a PC?

uhh watched a video, never read up on details

Then how did you even get to the point at which you are plugging cables in? Have you installed the CPU and RAM yet?

This guide is helpful http://www.tomshardware.com/forum/274745-31-step-step-guide-building

Did you not read my original post? I'm putting a new one in soon. I'm upgrading my current pc, just changing psu and gpu

I apologize.