How do I make this setup work??

[The realogkush912]

I have an audio technica at2020 hooked up.
I have Logitech g430 headset hooked up.
I have Logitech speakers w/subwoofer hooked up.
Windows 10.
How do I get it working so I have the mic from my at2020 working and just audio from my headset and speakers?!
PLEASE HELP!

 

[greens]

Man right click the speaker.
Select Playback Devices
Set your desired set as Default Device

Then right click the speaker.
Select Recording Devices
Set your desired set as Default Device

 

[iXeon]

Can you explain more clear? You want to have the mic input to be played in the speaker and the headset?

 

[The realogkush912]

Man right click the speaker.
Select Playback Devices
Set your desired set as Default Device

Then right click the speaker.
Select Recording Devices
Set your desired set as Default Device

Okay I did that. The speaker is my main device and my mic in my main device. But there still is no sound coming out

 

[greens]

There is no sound coming out of your speakers? Like when you play music, where is the sound coming from if not the default device?

 

[iXeon]

You should go to the mic settings and set the mic on listen to the device mode then you can hear the mic input coming out of speakers and headset

 

[The realogkush912]

There is no sound coming out of your speakers? Like when you play music, where is the sound coming from if not the default device?

Oh no I'm sorry. The sound comes out the speakers fine. The mic isn't able to play sound

 

[greens]

This thread is getting more and more confusing.

Mics don't play sound man.

Are you looking to pass the Mic sound to your other device? because that solution was posted by iXeon

 

[The realogkush912]

This thread is getting more and more confusing.

Mics don't play sound man.

Are you looking to pass the Mic sound to your other device? because that solution was posted by iXeon

No no no no no no

When I speak into the mic, in the control panel it shows the sound is there, but no one else can hear me talk, like game chat. Nobody can hear me

 

[iXeon]

Well maybe the mic signal is weak depending on the sound card you using you should be able to boost the mic signals and have a stronger sound. And check that the software you trying to speak in is recognizing the mic

 

[The realogkush912]

Well maybe the mic signal is weak depending on the sound card you using you should be able to boost the mic signals and have a stronger sound. And check that the software you trying to speak in is recognizing the mic

I'm using Realtek audio

 

[iXeon]

Go to mic tab on the realtek hd audio manager then you have two sound variables in there at the end of the second one theres a option that you can boost the mic signal on there.

 

[The realogkush912]

Go to mic tab on the realtek hd audio manager then you have two sound variables in there at the end of the second one theres a option that you can boost the mic signal on there.

There is no mic tab

 

[iXeon]

Did you connect the mic through 3.5 mm jack?if so try to connect it to the red one and in the realtek hd audio manager duble click on the red jack and set it as microphone.

 

[The realogkush912]

Did you connect the mic through 3.5 mm jack?if so try to connect it to the red one and in the realtek hd audio manager duble click on the red jack and set it as microphone.

My audio technica at2020 is usb

 

[iXeon]

The you should boost it through it's own manager .does it have a controller software?
And see if there is a boost option on here:
1-control panel
2-audio devices
3-microphones
4-select the desired mic
5-go to setting
6-look for boost option in there

 

[The realogkush912]

The you should boost it through it's own manager .does it have a controller software?
And see if there is a boost option on here:
1-control panel
2-audio devices
3-microphones
4-select the desired mic
5-go to setting
6-look for boost option in there

Nope it doesn't have a software on its own

 

[iXeon]

And due to the mic being connected through usb make sure that the sofware you're trying to speak in is recognizing it because most of the softwares are expecting the mic as a 3.5mm jack

 

[The realogkush912]

And due to the mic being connected through usb make sure that the sofware you're trying to speak in is recognizing it because most of the softwares are expecting the mic as a 3.5mm jack

Thank you for all the replies. I got it working