How do I overclock my RAM to its stated speed? (Gigabyte AB350-Gaming 3)

[Ropuchy]

Hello.

I've got a kit of Corsair LPX 3200MHz RAM (2x8)
It runs at 2133MHz default.

I have a Ryzen 1600 and a Gigabyte AB350-Gaming 3 motherboard.
I'm using BIOS version F7.

Whenever I change anything with the RAM in the BIOS, and after saving and exiting, the computer will attempt to start up about 3 times, then reset the BIOS settings so that it can boot.

I've tried only changing the RAM speed to 2400MHz, but that did the same thing.

 

[smorizio]

http://www.gigabyte.us/Motherboard/GA-AB350-Gaming-3-rev-10#support-dl
try the newer f8 bios. if the bios is 1.3x ram when overclocked you may have to bump dram voltage.

 

[Ropuchy]

http://www.gigabyte.us/Motherboard/GA-AB350-Gaming-3-rev-10#support-dl
try the newer f8 bios. if the bios is 1.3x ram when overclocked you may have to bump dram voltage.

The F8 version says it improves compatibility with RAM. This RAM has worked with others running it at 3200MHz for BIOS versions previous to mine, so I'd rather not have to update my BIOS if others have gotten it to work fine.

It's not 1.3x at all, though. It didn't work with 2400MHz, which is about 1.125x.

Thanks for the response.