How do I remove the front panel of the phantom 530?

[Sovasin]

The manual says I should pull up from the bottom but I can't get it to pop off no matter how hard I pull.

http://imgur.com/O2Z5Ofp this is the front panel I'm trying to remove. I need to remove it so I can replace the front fan.

http://imgur.com/oVQMvsT this is the handle on the bottom I'm pulling on.

 

[synphul]

Check this vid at around 4:25, Bill Owen removes the front cover by reaching inside with the door off and pressing against the tabs as he pulls. Probably to help them release, looks like the front cover came off one side at a time. Once one side is loose, the other is usually easier to pull off. Hope this helps.

https://www.youtube.com/watch?v=aZxhvfSVLpM

 

[alexoiu]

It should work: http://support.nzxt.com/hc/en-us/articles/202799230-How-do-I-remove-the-front-and-top-panels-

 

[Sovasin]

Thank you! The method in the video worked. However, I have no idea how to screw the fan on http://imgur.com/I2BFVw7

I can't see a clear way to use my screwdriver to screw it on. I guess I could if I removed the hard drive bays but that would take forever. Any advice?

 

[alexoiu]

You need longer screws (you can find among those that came with the case and not with the fan).

 

[Sovasin]

Thanks! I found a few. Do you know what they're called? I need to buy more, I've only got three.

 

[alexoiu]

It's 6-32x35 I guess: http://www.amazon.com/Screws-6-32-cross-slotted-Black-Nickel/dp/B004CLE6IK