How do you Clean the CM Storm Enforcer?

[TheJJBman11]

Hey!
I have a CM Storm Enforcer case, recently I have read the ventilation and dust filtration is poor. I just wanted to know how you clean the front and bottom dust filters?

I used a vacuum on the front outside one (I now know that you're not supposed to do that but nothing bad has happened); from now on I'm going to use compressed air inside the case and blow it out.

How do you clean the bottom one? If you use compressed air it would blow the dust inside the PSU.

Also, how do you clean the components? Like the GPU and fans?

Thanks in advance.

 

[i7Baby]

Open the case and blow it all out with compressed air. I do this about once a year.

I just vacuum the filters from the outside of the case - about once a month.

 

[TheJJBman11]

Open the case and blow it all out with compressed air. I do this about once a year.

I just vacuum the filters from the outside of the case - about once a month.

Vacuum the PSU filter from the outside?

 

[i7Baby]

No. I blow it out.

 

[TheJJBman11]

No. I blow it out.

Okay. I used a vacuum for the front filter and the PSU filter, will any negative impacts occur? I'll refrain from doing so in the future but so far the only negative is the scratches on the metal casing and the mesh filtration has been moved very slightly.

 

[i7Baby]

"I used a vacuum for the front filter and the PSU filter, will any negative impacts occur?" - No. Do you use a brush attachment - to loosen dust and to prevent banging anything?