The screenshot below shows the test I ran on my hard drives. I removed the jumper so I should be capable of 300MB/s. 20.8MB/s seems awfully slow. Any suggestions, comments?
Here is my setup:
Hard Drives
2 x Seagate Barracuda 7200.11, 1TB, 7200 RPM, SATA 3.0Gb/s Internal Hard Drive, Average Latency 4.16ms.
- Both setup in Raid 1 configuration (mirroring)
Processor
Intel Core 2 Duo E8500 3.16GHz
RAM
CORSAIR Dominator 4GB (4 x 1GB) SDRAM DDR2 800 Dual Channel
Motherboard
ASUS P5Q Pro w/ Vista Ultimate 64-bit
Here is my setup:
Hard Drives
2 x Seagate Barracuda 7200.11, 1TB, 7200 RPM, SATA 3.0Gb/s Internal Hard Drive, Average Latency 4.16ms.
- Both setup in Raid 1 configuration (mirroring)
Processor
Intel Core 2 Duo E8500 3.16GHz
RAM
CORSAIR Dominator 4GB (4 x 1GB) SDRAM DDR2 800 Dual Channel
Motherboard
ASUS P5Q Pro w/ Vista Ultimate 64-bit