How Hard to Install microAtx MB into Fractal R6 case?

[mian99]

Hi,
I'm considering putting a Gigabyte H370 MB microAtx MB into a Fractal R6 case and I'm curious as to whether it will be difficult to do so - I believe the Fractal case is designed for a standard ATX MB and probably has standoffs set up for that size, etc. Will I have to 'reinvent the wheel' to fit the microATX MB?

The Giigabyte MB features are important to me, and aren't found on their standard size MB. (I'm also loyal to Gigabyte and Fractal...this will be my second build using these parts.)

Thanks...

 

[Calvin7]

Motherboard compatibility

eATX (up to 285mm wide), ATX, mATX, ITX
http://www.fractal-design.com/home/product/cases/define-series/define-r6-black

You asked, how hard it is to install. I suggest if your capable of reading and following directions it shouldn't be too difficult. .

 

[norcalsc]

it will not be difficult. you will be able to select where the standoffs go as fractal includes a bunch of them along with screws and zip ties. You will be happy, Fractal is good stuff

 

[mian99]

it will not be difficult. you will be able to select where the standoffs go as fractal includes a bunch of them along with screws and zip ties. You will be happy, Fractal is good stuff

Thanks!