How hot is a Barton 2500+ @ 2200MHz

Toggle sidebar Toggle sidebar
Titanion

Titanion

Distinguished
Dec 8, 2002
1,533
10
19,795
Will a Thurmalright SLK700 with a smartfan do the job...

<font color=red><b>To reign is worth ambition though in Hell:
Better to reign in Hell, than serve in Heav'n.</b></font color=red>
John Milton, <i>Paradise Lost</i>, II 262-263<P ID="edit"><FONT SIZE=-1><EM>Edited by Titanion on 02/10/04 05:25 PM.</EM></FONT></P>
 
I'm curious myself. It seemed to do Ok on stock cooling but then I didn't run it hard for very long. I'm going to get one where the multiplier is locked. I wouldn't mind burning that one too much.

The loving are the daring!<P ID="edit"><FONT SIZE=-1><EM>Edited by Flinx on 02/03/04 09:43 PM.</EM></FONT></P>
 
SK7 i'm not sure with smartfan would do the job(never used one myself), i know smart case fan 2 would do the job.

-Intel PIV 2.6C @ 3.276G -Asus P4P800 -OCZ Copper 4x256 4000EL memory @ 252mhz 2.5-3-4-6 -XFX 5900 128meg 530/1020 -SB audigy -2x120G Seagate 7200.7 S-ATA150 hdd -450 Enermax PSU
 
i have a thermalright SLK900-A and a vantec 92mm fan and mine runs at about 48-49 deg C under load.

AMD AthlonXP 2500 @ 3200 (11x200Mhz)
Gigabyte GA-7N400 Pro2
Geil 2x256MB PC3200 DDR (2-3-3-11)
Gigabyte Radeon 9200 128MB VIVO
WD 36GB 10,000RPM 8MB SATA
Maxtor 40GB 7,200RPM 8MB ATA133
 
I actually ordered a SLK900A to replace my SLK700, but I will miss it... the SLK700 is hardy, and it feels good in my hand not like the stock heatsinks...

<font color=red><b>The mind is in its own place, and in itself
Can make a Heav'n of Hell, a Hell of Heav'n.</b></font color=red>
John Milton, <i>Paradise Lost</i>, Book II
 
i am running a 2500 barton at 2200mhz and my temp never goes above 42C while loaded, and thats with the stock heatsink and fan that came with the processor from AMD, i have one 80mm case fan in the rear and one 60mm fan in the side window panel, i did have to up my power supply from a 300 watt to a 450 watt to get it to be stable, but thats fine :) post screen reads 3200+ :) thats all that matters in the end!

Fat, Drunk, and Stupid is no way to go through life Son.
 
Well that depends on how high you had to up your voltage. Mine is at 50c on the die at all times ,load or no load, and 35-40c on the socket.

Barton 2500+ @ 2200mhz (10x220 vcore @ 1.8)
Asus A7N8X Dlx 440 FSB
1gb Geil GD pc3500 Dual Channel (2-3-3-6)
Segata 80gb SATA 8.5ms seek
ATI Radeon 9800 Pro(420/720)
 
Do you actually need your Vcore at 1.8 to get your fsb to 200... I am getting 196 with 1.7 no problem... my temps are low, too, with my SLK700...

<font color=red><b>The mind is in its own place, and in itself
Can make a Heav'n of Hell, a Hell of Heav'n.</b></font color=red>
John Milton, <i>Paradise Lost</i>, Book II
 
Yep I do, Cranked it a little and got it to run and bench but had unexplained software corruptions. Bumped it up to 1.8 and have not ecountered such thing yet.

Barton 2500+ @ 2200mhz (10x220 vcore @ 1.8)
Asus A7N8X Dlx 440 FSB
1gb Geil GD pc3500 Dual Channel (2-3-3-6)
Segata 80gb SATA 8.5ms seek
ATI Radeon 9800 Pro(420/720)
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom