how to change front fans in rosewill blackhawk case?

[nichijoke]

this cage right here: http://youtu.be/n0vWVKxi-pY is blocking me from accessing the fans to change them. can someone please tell me how to do this?

 

[maestro0428]

You most likely take off the front panel to get at the front fan. There should be some tabs or screws that hold it in place.

 

[inerax]

http://www.rosewill.com/Mgnt/Uploads2/AttachmentForProduct/blackhawk-ultra_um_v1.pdf

Your best friend is above

 

[nichijoke]

You most likely take off the front panel to get at the front fan. There should be some tabs or screws that hold it in place.

i did that and this cage is blocking it: http://youtu.be/4kV4RO9LU4o

 

[nichijoke]

http://www.rosewill.com/Mgnt/Uploads2/AttachmentForProduct/blackhawk-ultra_um_v1.pdf

Your best friend is above

this didn't really help me but thank you

 

[inerax]

http://www.rosewill.com/Mgnt/Uploads2/AttachmentForProduct/blackhawk-ultra_um_v1.pdf

Your best friend is above

this didn't really help me but thank you

on page 6 it shows how to remove the front fans from the rosewill blackhawk case.....

 

[nichijoke]

http://www.rosewill.com/Mgnt/Uploads2/AttachmentForProduct/blackhawk-ultra_um_v1.pdf

Your best friend is above

this didn't really help me but thank you

on page 6 it shows how to remove the front fans from the rosewill blackhawk case.....

no it doesn't i didn't see anything on page six about the front fans i saw the two top fans but not the two front fans

 

[ThatVietGuy]

How about you try taking off the 4 screws for one fan and see if the fan just slides out the sides or through the top?

 

[nichijoke]

How about you try taking off the 4 screws for one fan and see if the fan just slides out the sides or through the top?

i just checked and it won't let me... i'm thinking now when the fans die just buy a new case because i can't figure it out and i don't see what else i can do

 

[maestro0428]

There must be a way to remove it. I cant tell from the manual. I looked at some pics from reviews and although I cant really tell, once the front is off you can unscrew the fans and then slide them out the side.

 

[maestro0428]

Got it! You can pop out the front metal panel the fans are attached to. Here http://www.anandtech.com/show/6854/rosewill-blackhawk-ultra-case-review-were-it-not-for-competition/2 second paragraph.

 

[boosted1g]

I pulled out the fans on my case to snip the annoying LED lights on it, a few months ago. I believe you have to pull off the front cover, just pull from bottom, and then you unscrew the fans from the front and then you will have to slide them out the side.

If you dont get your answer in the next 6-7 hours I will check it when I get home from work as I have the blackhawk case.

 

[nichijoke]

I pulled out the fans on my case to snip the annoying LED lights on it, a few months ago. I believe you have to pull off the front cover, just pull from bottom, and then you unscrew the fans from the front and then you will have to slide them out the side.

If you dont get your answer in the next 6-7 hours I will check it when I get home from work as I have the blackhawk case.

ok thank you very much if it's not too much to ask do you think you can post a youtube video with a link on how to do it?

 

[boosted1g]

Apologize for not getting this up yesterday as promised, im not only my family's go to person for computers/home theater/networking issues, but also for cars.

Anyways, fans come out just as said above. Pull off front cover, unscrew fan(s) from front, slide out the side. Of course make sure when you put replacement fans in they are oriented correctly as an intake (arrow pointing towards inside of case).

http://youtu.be/A3jgL8TUUdo

 

[nichijoke]

Apologize for not getting this up yesterday as promised, im not only my family's go to person for computers/home theater/networking issues, but also for cars.

Anyways, fans come out just as said above. Pull off front cover, unscrew fan(s) from front, slide out the side. Of course make sure when you put replacement fans in they are oriented correctly as an intake (arrow pointing towards inside of case).

http://youtu.be/A3jgL8TUUdo

thank you for helping me