[SOLVED] How to configure an internal hdd which I have converted to external hdd?

[Maytas28]

I took out a 160 gb internal hdd and put it into an enclosure. Currently it looks like as in the pic (Disk 1). I am looking to sell this to someone, and what I want to do it is remove the partitions and then again make the partitions, I want the 100 mb unallocated space to be in one of the partition. I just want to sanitize the disk, plz feel free to suggest any other way.

 

[R_1]

if you have backed up the data or no longer need it, continue.
if not stop and backup the data NOW. there be dragons ahead.

right click on the (E: )volume and select delete partition, repeat the same with the (F: ). you will not have a fresh disk ready for an OS install.
if you wish to use it as a storage volume you can create a partition/volume on the drive and use all the space. the drive will now be ready for anything.

 

[Maytas28]

if you have backed up the data or no longer need it, continue.
if not stop and backup the data NOW. there be dragons ahead.

right click on the (E: )volume and select delete partition, repeat the same with the (F: ). you will not have a fresh disk ready for an OS install.
if you wish to use it as a storage volume you can create a partition/volume on the drive and use all the space. the drive will now be ready for anything.

Thanks it worked. I thought it would require something more complex but this was as simple as it can be.