[SOLVED] how to connect 4 RGB cabinet fan and 1 RGB strips to my motherboard ASUS ROG B360f 1RGB header?

[asusrogseriesb360]

i am new to this pc building world
i dont have a clue to how to connect all my

1) Four case fan Antec Prizm 120 RGB Case Fan Radiator with Asus Aura Sync
2)The RGB lightning strip which i bought from the local market

and my asus rog B360F have only 1RGB header and also all the fans should support the aura software came with the motherboard.
dont want to invest much searching for value for money solution.


MY RIG
cpu: i5 8400
mobo: asus rog b360f
ram; crosssair vengence lpx 8gb ram
gpu: asus gtx 1060 6gb
psu: antec 550 watt

 

[cin19]

You have to buy a RGB hub controller.

 

[asusrogseriesb360]

You have to buy a RGB hub controller.

can you suggest any one in particular model or can i use only wire splitter to connect all the component to 1 rgb header of my mobo

 

[cin19]

The RGB lightning strip which i bought from the local market

I don't know what type connector it has, and how much power it will draw.

For your 4 Antec Prizm 120 RGB Fans, according the Antec site, the fan will draw power like: FAN: 0.18A±20% ; LED:0.30A±20% https://www.antec.com/product/cooling/prizm-120-rgb.php If they will run at +20%. that means 4 fans will draw 2.3 Amp from the RGB header, and the header will output maxi 3 Amp.

So if the strip will draw less power, and has same connector, you may buy the rgb Y splitter https://www.amazon.com/RGB-LED-Light-Strip-Splitter/dp/B071DHPXDT . Otherwise you will need a RGB LED controller, like this https://www.newegg.com/Product/Product.aspx?Item=9SIAFJ87N02260&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-_-na-_-na-_-na&cm_sp=&AID=11552995&PID=6361382&SID=tomshardware-7035823336511002888