How to connect RGB for CoolerMaster Lite 5 RGB to motherboard?

[grantwmcasey]

Hi,

I can get the fans spinning on my case but no LED's are coming up because I don't know which spot on the motherboard it goes in.

Case: http://www.coolermaster.com/case/mid-tower/masterbox-lite-5-rgb/

Motherboard: https://www.msi.com/Motherboard/B350-TOMAHAWK.html

 

[jay32267]

There is an RGB header on the MB.

- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 4 x SATA 6Gb/s connectors
- 2 x USB 2.0 connectors (support additional 4 USB 2.0 ports)
- 2 x USB 3.1 Gen1 connectors (support additional 4 USB 3.1 Gen1 ports)
- 1 x 4-pin CPU fan connector
- 1 x 4-pin water-pump-fan connector
- 4 x 4-pin system fan connectors
- 1 x 4-pin RGB LED strip connector
- 1 x Serial port connector
- 1 x Parallel port connector
- 1 x TPM module connector
- 1 x Front panel audio connector
- 2 x System panel connectors
- 1 x Chassis Intrusion connector
- 1 x Clear CMOS jumper

https://www.msi.com/Motherboard/B350-PC-MATE/Specification

 

[jay32267]

It is called JLED1 on the MB diagram.

JLED1: RGB LED strip connector
This connector allows you to connect the extended 5050 RGB LED strips.
Important
y This connector supports 5050 RGB multi-color LED strips (12V/G/R/B) with the
maximum power rating of 3A (12V). Please keeping the LED strip shorter than 2
meters to prevent dimming.
y Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing the RGB LED strip.
y Please use MYSTIC LIGHT to control the extended LED strip.
1
1 +12V 2 G
3 R 4 B
Video Demonstration
Watch the video to learn how to install 5050 RGB LED strips to RGB LED
connector.
https://youtu.be/CqNHyADzd2Q