Question How to connect the pre-installed fans in the Phanteks XT View case ?

[jjfp98]

hi, sorry for my bad english but i try to explain.. my motherboard is msi b650 gaming plus wifi

first of all i want controll the fans by the motherboard so in the case i see one female cable 3 pin so if i connect this cable to the motherboard header jargb 5v, the leds of the fans will work, thats correct?

i see also 2 female cables 4 pin pwm, if i connect one of this 2 cables on the motherboard header sys_fan, the fans will work? help please

 

[jjfp98]

??

 

[RAIDGoblin]

photo's and full specs would help here,

your motherboard manual will tell you which sockets are to drive case fans, usually there are not enough for all the case fans if you have a bigger case, you can use splitters or you can connect some of the fans to the PSU and they will just be running continuously (if they are good fans that are not too noisy this won't be a problem), the 4 pin pwm socket close to the CPU is for the cooler

EDIT: Here's a link to the multi-language manual download from msi website for your motherboard:
https://download-2.msi.com/archive/mnu_exe/mb/B650GAMINGPLUSWIFI.pdf

it shows that you have a 4 pin pwm connector for the cooler, and a 4 pin pwm connector for a water cooler pump (you would use which ever you need for your system), and 4X 4 pin pwm connector's for your case fans, if you have more than 4 case fans you can use a spliter, e.g.
https://www.overclockers.co.uk/phan...lahYnYoj1ylqbDAhTOYNQO3KHOY_b2qBoC2IgQAvD_BwE

if your case fans are 3 pin, you just only use 3 of the 4 pins on the motherboard, it will power the fan but the speed won't be variable