How to connect two fans to a PSU

[Grumpybutcute]

I have 2 additional Fans for intake and outtake they are currently not connected.

I need someway to connect a 6 pin to 2 PWM fans or something like that.

I cant find a cable out there could someone assist.

 

[BSOD BSTD]

you can use something like this to connect the fans directly to the PSU:

http://www.ebay.co.uk/itm/Phobya-Y-adaptor-4Pin-Molex-to-2x-4Pin-PWM-and-3Pin-30cm-black-/201311600572?pt=LH_DefaultDomain_3&hash=item2edf1b3fbc

bear in mind that they will run at full speed and wont be variably controlled by the computer, I have added a physical switch for mine so I just turn them on while gaming. You can also look into getting a separate fan controller for variable control of multiple fans.

 

[Grumpybutcute]

you can use something like this to connect the fans directly to the PSU:

http://www.ebay.co.uk/itm/Phobya-Y-adaptor-4Pin-Molex-to-2x-4Pin-PWM-and-3Pin-30cm-black-/201311600572?pt=LH_DefaultDomain_3&hash=item2edf1b3fbc

bear in mind that they will run at full speed and wont be variably controlled by the computer, I have added a physical switch for mine so I just turn them on while gaming. You can also look into getting a separate fan controller for variable control of multiple fans.

How does this connect to the PSU, As i dont have any Molex connectors on my PSU

 

[BSOD BSTD]

they are standard on PSU's, what is your PSU

 

[Grumpybutcute]

they are standard on PSU's, what is your PSU

cx500m