How to enter BIOS settings Asus rog g20AJ

[alexo1001]

I have just done a full reset of my computer running Windows 8.1. It did not finish and I cannot see anything displayed on my monitor. So I have decided that I want to create a windows 10 bootable usb stick to install windows 10. My question is, how can I enter the BIOS settings for my computer.

 

[Jasjar]

Del or Esc should bring you to the BIOS settings

 

[alexo1001]

Del or Esc should bring you to the BIOS settings

When do I have to press those keys.
Do I have to press the key, then press the power button and keep the key pressed down until the BIOS settings appear or what?

 

[Jasjar]

Press them when the BIOS screen appears

 

[alexo1001]

Press them when the BIOS screen appears

It doesn't appear. That's the problem. The screen doesn't even detect a connection but the pc is on.

 

[Jasjar]

You need to flash the BIOS.

 

[alexo1001]

You need to flash the BIOS.

Please explain.

 

[Jasjar]

Put the newest BIOS on a cd put in into the disk drive and turn on your pc. With luck your screen should turn on.

 

[alexo1001]

Put the newest BIOS on a cd put in into the disk drive and turn on your pc. With luck your screen should turn on.

Do I have to press any buttons after I insert the latest bios?

 

[Jasjar]

No

 

[alexo1001]

No

Can I also install the latest bios onto a USB stick? I don't have any of my dvd's or cd's with me at the moment.

Edit: I downloaded the latest bios file and it had the extension: .cap. What should I do with it?

 

[Jasjar]

A usb stick will work. Format the usb to Fat32 and put the .cap on it.

 

[alexo1001]

A usb stick will work. Format the usb to Fat32 and put the .cap on it.

I just have to put it on the usb stick? It seems too simple to be true.

 

[jay_rogers]

Change the default BIOS setting if you are getting the any error message on your screen during bootup and request you to run BIOS setup Or install a new system component.

 

[alexo1001]

Change the default BIOS setting if you are getting the any error message on your screen during bootup and request you to run BIOS setup Or install a new system component.

My pc always boots up too fast to show the bios message and the screen doesn't turn on now.

 

[alexo1001]

A usb stick will work. Format the usb to Fat32 and put the .cap on it.

I formatted the usb stick as fat32, put the .cap file on it and booted up the other computer while the usb stick was plugged in. It still does not show anything on the screen.

Edit: If you have a Solution, please tell me soon as I am going to go to the closest Tech store for them to fix it. I would like to avoid doing that though.