[SOLVED] how to fix data error(cyclic re-tendency chec)

[samirkhan]

i m facing problem of data error (cyclic re-tendency check) when i was coping file my laptop hangs nd restart its saying error its show bad disk in disk management while crystal disk info say good i am unable to clean format the disk need help

 

[popatim]

Upload screen shots of both to a hosting site such as imgur and provide links to them here please.

 

[USAFRet]

i m facing problem of data error (cyclic re-tendency check) when i was coping file my laptop hangs nd restart its saying error its show bad disk in disk management while crystal disk info say good i am unable to clean format the disk need help

You "fix" that by replacing the drive, and recovering the data from your backup.

 

[popatim]

You can try a diskpart clean command on it and then see if it will partition and format.
This isn't often a software error.

 

[samirkhan]

You "fix" that by replacing the drive, and recovering the data from your backup.

i dont care about my data i just need to make is useable i mean my disk

 

[samirkhan]

You can try a diskpart clean command on it and then see if it will partition and format.
This isn't often a software error.

diskpart is not possible because there is not ltter assigned to it and also my whole disk is not showing in my computer but in disk management , minipartional tool showing with bad disk nd no option are available there

 

[samirkhan]

Upload screen shots of both to a hosting site such as imgur and provide links to them here please.

https://imgur.com/all

View: https://samirkhan7391.imgur.com/all/?third_party=1

screen short and i was wrong disk mangment show unallocated

 

[USAFRet]

i dont care about my data i just need to make is useable i mean my disk

It is a physically failed drive.
It happens.

Replace it.


(Can't see your pic above)

 

[mundial]

This is a very common error message for disks with extensive bad sectors or bad/weak heads.

blog post re: data recovery from disk showing Cyclic Redundancy Check error

 

[samirkhan]

You can try a diskpart clean command on it and then see if it will partition and format.
This isn't often a software error.

with disk part when i try to clean it saying that the disk is been successfully cleaned but when i try to convert it to mbr or gpt then it give me data error (crc)
i also go throught it by surface testing and the starting sector was a showing by the test was a bad sector nd only that one was bad sector

 

[popatim]

Cleaning should have erased the existing partitions. You can also use it to formate the drive when you're done.
https://www.seagate.com/support/kb/...-a-drive-through-the-command-prompt-005929en/

You probably might want to run CrystalDiskInfo or HDtune on the drive and note the "raw values" for ID's = 05, c5, & c6 fromo the SMART output. .
https://crystalmark.info/en/software/crystaldiskinfo/
https://www.hdtune.com/

 

[ex_bubblehead]

As you've been told twice, now three times, the drive has failed and is not in any way repairable. Replacing the drive is the ONLY solution.