hi
my current ADSL2+ modem is ASUS - N10 C1 - 150mps
and i also have a TP-LINK -- TD-W8961-ND - 300mbps
1- first of all according to higher bit rate of tp-link and in the other hand better quality and improvement of asus N10-C1 , witch one you suggest i use as default modem?
2- i tried to install tp- link on my laptop too and after resetting and installing , it wasent transfering data although it has been installed correctly
could it be because of same 192.168.1.1 ip address for both?!and if it is where should i change ip on setting and give it another one like 192.168.1.2 or .3 or.... .50
and generally , how should i install them both and use them each one at a time differently?
3- and finally how can i make one of them as repeater and should it be connected to default one only by LAN or it can became a repeater with wireless?
and if its possible (witch it is but i need to know the technical way) witch one you suggest i make the master or slave?
my current ADSL2+ modem is ASUS - N10 C1 - 150mps
and i also have a TP-LINK -- TD-W8961-ND - 300mbps
1- first of all according to higher bit rate of tp-link and in the other hand better quality and improvement of asus N10-C1 , witch one you suggest i use as default modem?
2- i tried to install tp- link on my laptop too and after resetting and installing , it wasent transfering data although it has been installed correctly
could it be because of same 192.168.1.1 ip address for both?!and if it is where should i change ip on setting and give it another one like 192.168.1.2 or .3 or.... .50
and generally , how should i install them both and use them each one at a time differently?
3- and finally how can i make one of them as repeater and should it be connected to default one only by LAN or it can became a repeater with wireless?
and if its possible (witch it is but i need to know the technical way) witch one you suggest i make the master or slave?