[SOLVED] How to install LED fans?

[BPR96]

I’m looking at buying a few of these fans (linked below)

im wondering what sort of connections do LED fans require? Are they as simple as a 3/4 pin connector or do they require a hub/other connections. Thanks


https://www.amazon.co.uk/Corsair-AF...8031&rnid=419157031&rps=1&s=computers&sr=1-10

 

[SATADATA]

These fans seem to only have a 3 pin standard fan power connector. No supplementary power or led control is required.

 

[Karadjgne]

Simple Red led fans. One wire, just plugs into the regular fan header. Use splitters or hubs only if you don't have enough fan headers for all the fans. They are 0.23A fans, so a maximum of 3 fans per header.

Because they are 3pin voltage controlled, it means the motherboard lowers the voltage to the fan to lower the speeds. This means there's less voltage to also power the leds. So slower fan = dimmer light. No way around that fact, it's been like that for years on the 1 color led fans.