Question How to OC?

[mandeep57]

Hrllo,
Someone told me to download ryzen master software to do overclocking.
But i dont know what to do in it.
I just want to Overclock my iGpu
Please help me.

Here is pic of what ryzen master show me :

Idk what to change.please help

My spec :
Ryzen 5 2400g
Msi b450 pro vdh plus mobo
2x8gb 3200mhz gskill ram
Thermaltake 450w psu
Coolermaster 310c case

 

[Traditore]

Set APU GFX Clock to 1400 and voltage to 1.2.

Download Furmark for testing. Launch Furmark, select your monitor resolution and press 'Custom preset' or select one of the pre-made presets e.g. HD, FullHD, etc. If the test runs fine, go back to Ryzen Master and increase the overclock by 10MHz. Test again. Repeat until test fails. You should be able to overclock up to 1500-1600 MHZ.

You can overclock CPU up to at 4.0ghz at 1.38 voltage. Remember to go by small incremental increase and you'll be fine.

 

[mamasan2000]

I wouldn't recommed Furmark unless you want a dead GPU.
https://www.overclock.net/forum/74-...can-furmark-kill-your-gpu-actually-yes-4.html

Unigine Superposition, it is free. Do any of the 1080p runs.

 

[mandeep57]

Set APU GFX Clock to 1400 and voltage to 1.2.

Download Furmark for testing. Launch Furmark, select your monitor resolution and press 'Custom preset' or select one of the pre-made presets e.g. HD, FullHD, etc. If the test runs fine, go back to Ryzen Master and increase the overclock by 10MHz. Test again. Repeat until test fails. You should be able to overclock up to 1500-1600 MHZ.

You can overclock CPU up to at 4.0ghz at 1.38 voltage. Remember to go by small incremental increase and you'll be fine.

I just wanna set my gpu at 800mhz-1000mhz maybe
Currently its set at 400mhz.....
so if i need to set it at 800 or maybe 1000mhz then voltage i put is 1.2? Right?

 

[mandeep57]

I wouldn't recommed Furmark unless you want a dead GPU.
https://www.overclock.net/forum/74-...can-furmark-kill-your-gpu-actually-yes-4.html

Unigine Superposition, it is free. Do any of the 1080p runs.

thanks for link and i read it...
as of my understanding furmark kill gpu when we go for higher settings

What if i just want to Oc my igpu at 800 mhz(currently at 400mhz)
will it be a problem? and should i put voltage 1.2 if i do OC at 800mhz

 

[mamasan2000]

Furmark can kill at stock settings.
I have never owned or used an APU so I can't help you there.
Some help here: View: https://www.reddit.com/r/Amd/comments/87cfu6/what_are_your_ryzen_5_2400g_overclock_settings_at/

 

[mandeep57]

Furmark can kill at stock settings.
I have never owned or used an APU so I can't help you there.
Some help here: View: https://www.reddit.com/r/Amd/comments/87cfu6/what_are_your_ryzen_5_2400g_overclock_settings_at/

ok i figured out tht my current gpu is at 1240....
i am thinking to make it 1400mhz v1.2
but i dont know how to do it in ryzen master..
Please tell me steps to Only increase igpu safely?

 

[mamasan2000]

I don't have a clue. Someone else will have to help you. Check youtube for videos about Ryzen 2400g and Ryzen master?