How to program two individual X10 ZC15A's (Ninja Pan & Tilt mounts)? Each has it's own addressable power supply (APS) and remo

[SnotWerx]

I have two individual X10 Ninja Pan & Tilt mounts (ZC15A). Each has it's own addressable power supply (APS, XM14A) and remote control (CR14A), but each remote works both mounts no matter what settings I use on the APS/remotes. Examples: I've set one remote on "A" and the APS on "A 1", and the other remote on "D" and its APS on "D 2", and each remote still works both mounts. No matter what settings on remote/APS I've tried, both/either remotes still work both mounts together... I cannot get the remotes to work the mounts individually. I'm trying to get one remote to work one mount, and the other remote to work the other mount (individually/separately, not together). Thanks in advance for any help/advice. 🙂

 

[Ralston18]

Please see this link:

http://www.thex10shop.com/product/x10-cr14a-scanpad-ninja-pan-tilt-remote-control

Then note the following lines within the link:

"This is the X10 CR14A Ninja ScanPad remote control for use with the Ninja Pan and Tilt camera base. Can be used with just one camera or to switch views between up to four X10 video cameras. Multiple cameras require a transceiver module to use the remotes abilty to turn the cameras on and off."

If I understand it all correctly, you need to purchase the transceiver module to make things work as expected.

Look into the transceiver module. Find the User Guide/Manual and determine what the transceiver module truly provides and how it is applied or configured accordingly with respect to a multi-camera environment.