Question How To Put In the Universal Power Cord to the PSU without damaging the PSU?

[DeathHadArrived]

How To Put In the Universal Power Cord to the PSU without damaging the PSU?

 

[Zerk2012]

What PSU it should just plug into the back but the PSU needs to be able to use different input voltage. Most can go from 110 to 240 volts.

 

[DeathHadArrived]

What PSU it should just plug into the back but the PSU needs to be able to use different input voltage. Most can go from 110 to 240 volts.

no I am saying because that cable does not have a click to indicate that you put it in already and how can I know if it is fully into the PSU without damaging the cable and the PSU

 

[drea.drechsler]

How To Put In the Universal Power Cord to the PSU without damaging the PSU?

Just push hard till it bottoms. Unless you're Ahhhhnold you won't hurt anything.

 

[DeathHadArrived]

Just push hard till it bottoms. Unless you're Ahhhhnold you won't hurt anything.

ugh some bad news, my PSU zapped out when I turned on the power button. I messed up. I turned off the PSU while I did this and I still got problems.

 

[R2burkholder]

ugh some bad news, my PSU zapped out when I turned on the power button. I messed up. I turned off the PSU while I did this and I still got problems.

figure out what happened? i would think it would be unlikely to be a 220-120 voltage switch unless it was very old or cheap.

 

[emreaksu]

figure out what happened? i would think it would be unlikely to be a 220-120 voltage switch unless it was very old or cheap.

As new features are added to computers, things are getting more complicated for university students
bkz. https://duzce.edu.tr/yonetim-bilisim-sistemleri/