how to set fan speed asus sabertooth z77

[misfitkid86]

hey all, i want to plug my three pwm 4-pin fans in to the motherboard for control but i seem to be lost as to how to set them in the bios! i see the spot you can change profile to manual, silent, etc but is that it? can i get more control!? i'd like to run my fans at or around 1000 rpm (they're corsair sp120 quiet's) so what should i do? also speedfan doesn't seem to be compatible unless i'm missing something.....

 

[i7Baby]

Use the motherboard's UEFI - comes on the disk with the motherboard. per https://www.asus.com/Motherboards/SABERTOOTH_Z77/

 

[misfitkid86]

right, but since it doesn't seem obvious unless asus's idea of fan control is manual, silent, etc than i can't set it. am i missing something in the bios?

 

[i7Baby]

Read the mobo manual. Z77 is a few years old. Maybe its UEFI wasn't as sophsticated as now.

 

[Aliothale]

You can set fan speeds VIA the Asus Suite II, under Thermal Radar you can adjust settings for each fan manually. Be sure to apply for each fan you change. I used this for turning off my 80mm fans.

 

[misfitkid86]

You can set fan speeds VIA the Asus Suite II, under Thermal Radar you can adjust settings for each fan manually. Be sure to apply for each fan you change. I used this for turning off my 80mm fans.

ok that's what i was assuming but when i checked ai suite 2 i couldn't change anything, do i just set fans in the bios to manual or am i missing something? thanks!