Question How to use rgb controller with molex connector train

[stevehuperyog]

So I have 6 case fans that came with the case. The fans all only have one cable coming off of them connected to a female/male molex connection. They came already connected in a train. I have the rgb controller conmected to the molex train and the psu, but i have no rgb input for the controller, only power. The case came with no other adapters.

 

[CountMike]

So I have 6 case fans that came with the case. The fans all only have one cable coming off of them connected to a female/male molex connection. They came already connected in a train. I have the rgb controller conmected to the molex train and the psu, but i have no rgb input for the controller, only power. The case came with no other adapters.

Probably have to control them with software.

 

[Paperdoc]

Your second photo shows at right a box with 4 pins out the top and three buttons. That is the MANUAL control box for RGB (4-pin plain RGB) control and power. I expect it has a power input connection at the bottom we cannot see, and the output to your fans' lighting cables is the four pins at the top.

 

[stevehuperyog]

Probably have to control them with software.

How would I go about doing that without any connection to the mobo?