How would i install a graphics card? [IMAGES]

GcpMC

Reputable
Jan 1, 2015
73
0
4,640
My PC images inside are here :
1f48f471fba26766832ae353d1d02738.jpg

71NxLp7jS8L._SL1000_.jpg


I got show before but it was way too confusing. Please be detailed or something to help me out im new to PC gaming and the Graphics card is a EVGA GTX 750 ti (Normal Edition)
 
Solution
Here is a written guide to help with th install if you want
To install a graphics card you first want to remove the two highest expansion slot covers (the grated things on the back of the case right below where everything plugs into your motherboard from the outside.) Then take your graphics card and find the large section on the side where it has a bunch of gold teeth sticking out with a notch in one side like this . line up the cards ports with the opening you just made in the rear of the case and plug these teeth into the large black slot below your cpu fan and push down until locks into place(it will only fit in one way so you don't need to worry about that.) once that is seated properly you have to get the screws that...


I believe Amazon's image is outdated, or updated, im not sure but mine is the top. They are both the CybertronPC Trooper x6 though.
 


All good, it was just easy to spot because of the different colour on the PCIe slot and the HDD cables :bounce:
 


I appreciate the link to the video, but i have no idea what a PCI slot or something is, again im new to this, but is it the latch in the middle, or the left under the fan? Someone told me two different things and i got confused.
 
Here is a written guide to help with th install if you want
To install a graphics card you first want to remove the two highest expansion slot covers (the grated things on the back of the case right below where everything plugs into your motherboard from the outside.) Then take your graphics card and find the large section on the side where it has a bunch of gold teeth sticking out with a notch in one side like this . line up the cards ports with the opening you just made in the rear of the case and plug these teeth into the large black slot below your cpu fan and push down until locks into place(it will only fit in one way so you don't need to worry about that.) once that is seated properly you have to get the screws that came with your case and/or graphics card. and screw them into the holes above the I-O of the card. now that the card is properly secured you can plug your monitor into it and try to boot up your pc. If this works then you are going to want to go to the Nvidia website and download GeForce experience. once it is downloaded, run it and it should take you through a set up wizard that will configure your drivers for you and then you should be good to go (You can close geforce experience once it has finished setting up the drivers.)

That was kinda long so feel free to ask questions
 
Solution


Alright thanks for helping me locate it
 


Thanks for the Steps, i will try this out. :pt1cable:
 


What next? https://youtu.be/gcGQEmQngo4
I got lost after I put it in and the side thing dull case is out. Do I put it back in?
 


Ok i installed it but it feels the same for some reason, My dedicated video ram was on 2G before i put it in, could that be why? Do i set it back to default 700MB? I installed the drivers already.