Question Hp ProLiant dl380 G10

[AIIbrahim]

I have hpe dl380 G10 server
I have updated SPS firmware to Version:04.01.04.381. But the server now is unbootable giving error in ilo integrity scan found anomaly
I am unable to rollback to any version of SPS firmware.
Unfortunately I missed out updating ilo channel driver before updating sps.
The server now is unbootable. Any suggestions about this case?

Ilo version : ilo 5 v 2.18
Bios version: U30 v2. 34
Innovation engine: 0.2.2.0

 

[Lutfij]

I think you're going to need technical assistance from the big wigs over at HPE since you might need to recover the BIOS from it's current state. I can't seem to find any method to recover the BIOS or reflash the BIOS for that client system.

 

[AIIbrahim]

Thanks for the reply, could resetting ilo to factory default do any help!?

 

[kanewolf]

I have hpe dl380 G10 server
I have updated SPS firmware to Version:04.01.04.381. But the server now is unbootable giving error in ilo integrity scan found anomaly
I am unable to rollback to any version of SPS firmware.
Unfortunately I missed out updating ilo channel driver before updating sps.
The server now is unbootable. Any suggestions about this case?

Ilo version : ilo 5 v 2.18
Bios version: U30 v2. 34
Innovation engine: 0.2.2.0

Have you connected an ethenet to the iLO ? It might provide the option to update the iLO software from within the interface.

 

[AIIbrahim]

Have you connected an ethenet to the iLO ? It might provide the option to update the iLO software from within the interface.

Yes ilo is connected through ethernet but whenever I try to update sps firmware from there I got error that the last flash attempt was not successful and I am unable to update the firmware I even tried using hpqlocfg. Exe with no success