My HP Z600 Workstation won't start up with a my new XFX Radeon RX 570 8GB. I was previously using a Zotac GTX 560 SE and was working fine with it. The PSU is rated for 650w and the recommended for RX570 is 450w. I'm using a 6 pin to 8 pin adapter with the RX 570 and before i was using a single 6 pin to dual 6 pin adapter for the GTX 560. When trying to start up the computer it stays black screened and beeps 6 times with the red power button LED. I know that the 6 beeps indicates the following.
The Diagnostic LED blinks red 6 times and the system beeps 6 times (once per second), then a 2-second pause follows:
This indicates a pre-video graphic card error.
To resolve the issue, complete the following steps:
I'm just confused because it was working fine with the GTX 560 but doesn't want to work with the RX 570. I'm not sure what to do. Any help is appreciated.
The Diagnostic LED blinks red 6 times and the system beeps 6 times (once per second), then a 2-second pause follows:
This indicates a pre-video graphic card error.
To resolve the issue, complete the following steps:
- Reseat the graphics card.
- Replace the graphic card.
- Replace the system board.
I'm just confused because it was working fine with the GTX 560 but doesn't want to work with the RX 570. I'm not sure what to do. Any help is appreciated.
Facebook
Twitter
Instagram