HP Z600 Workstation Beep 6 times Please HELP!

Status
Not open for further replies.
Dec 5, 2018
3
0
10
0
HP z600 Beep 6 times then after 2 seconds beeps again 6 times.. this happened after i change some settings on the BIOS PCIe to (Compute)
 

Lutfij

Titan
Moderator
If the error is as shown in the section Solving Display Problems, then you can try and reseat the graphics card. Can you recall what settings you changed? You could remove the CMOS battery entirely and replace it after 15 mins but then you'd probably need to input time and other settings, if you're not familiar, it might be a daunting task.
 
Dec 5, 2018
3
0
10
0


The settings that I did was I change the PCI slot settings in BIOS enabled "compute" on all slots.
Now my PC will not reboot In BIOS. I get 6 beeps and red flashes. Some PC's that's an error for CPU. But the HP the code is graphics. By changing the settings it is not recognizing my graphics card. And I cant reset the BIOS because it wont boot far enough for me to get into BIOS settings. I've tried removing the battery, pushing the CMOS button and changed out the graphics card to a known good one. IT is not returning BIOS to default.
 
Status
Not open for further replies.

ASK THE COMMUNITY

TRENDING THREADS