Question HWMonitor shows CPU currents 200+ Amperage

Nov 12, 2019
3
0
10
Hello, a friend gave me his asrock ab350m-hdv and ryzen 3 1200. I've been trying to overclock both ram and cpu to get slightly less bottleneck on my old gtx980. Managed to reach 3.80GHz with 1.4 vcore (doesnt actually go higher than 1.37v stress testing with prime95 and temps are close to 80°C) and 2400mhz on the ram (xyperx 8gb 2133mhz) with 1.35v DRAM. Now my question is, I've been looking every single value on HWMonitor and with current oc setting, it happens sometimes to see a peak of 240-260A on the "CPU (node 0)" when usually doesn't go above 82-83A OC and 60A at stock. Should i lower some voltages or could it be just a bad lecture due to oc? Thanks in advance, sorry if my English is not the best :)