Archived from groups: microsoft.public.win2000.setup (
More info?)
You need separate partition or additional disk for W98.
Without the third-party loader it could be a bit complicated, but briefly,
assuming the computer starts from W98 disk/partition:
- boot into W98 and save its boot sector from the Command Prompt:
debug
L 100 2 0 1
n bootsect.f32
rcx
200
w
q
- boot into W2k Recovery Console and rewrite 1st (W98) disk MBR using
'fixmbr'; maybe, 'fixboot' for this disk won't harm anything; 'fixmbr /?'
and 'fixboot /?' provide the proper syntax;
- copy ntldr, ntdetect.com, and boot.ini files from W2k disk to W98 disk; in
case of the SCSI disk copy the ntbootdd.sys file as well;
- edit the copied boot.ini file; if both IDE disks are on the same channel,
it should look like
[boot loader]
timeout=5
default=multi(0)disk(0)rdisk(1)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)\WINNT="Microsoft Windows 2000"
/fastdetect
c:\bootsect.f32="Microsoft Windows 98"
If you go with one disk and two partitions, it should be
multi(0)disk(0)rdisk(0)partition(2).
P.S. Install VirtualPC or VMWare.