HyperX FURY 16GB (2 x 8GB)

[craze27384]

would HyperX FURY 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1866 Desktop Memory Model HX318C10FBK2/16 fit in my 760pm - p34 motherboard?

 

[Tradesman1]

Not sure on that particular mobo, the Fury operate off PnP and not positive if it (PnP) was implemented into the BIOS, if nothing else would make sure you have the latest BIOS. Also what CPU? Under PnP the DRAM will take into effect the CPU and set itself up to the max it 'thinks' it can run. An upper end FX might well run them at 1866, mid range FX will prob set up to 1600 and low end or older AMD at 1333 or even 1066

 

[CountMike]

All the FX processors have 1866 MHz controllers, only MB/BIOS may limit it. If it wouldn't set that speed automatically, you can do it manually in BIOS.

 

[Tradesman1]

Actually the MCs are 1333 native, per their own BIOS and Kernel Programming Guide, they do state that FX CPUs can run 1866 at 'up to' 1 stick per channel', though they don't specify 'which' FXs, have seen many 4 and 6 series FXs that can't run 1866, along with early 8 series