Question Hyperx Fury 3600MHz 32GB runns at 2400MHz after XMP Enabled.

[Arngren]

My Hyperx Fury 3600mhz 32Gb ram runs at a speed of 2400mhz after i have set the mother board to XMP. I got it working one time, then i tried fixing some other settings in the bios and it stopped working. I tried to sett all the settings to default and then sett the motherboard to XMP, but it is still not working. The Ram says on the website that it is XMP 2.0 ready.

CPU -Z reads
Max Bandwidth: DDR4-2400(1200MHz)
Part Number KHX3600C17D4/16GX
SPD EXT. XMP 2.0

At memory it reads:
DRAM Frewuency: 1199.7MHz
CL:17
tRCD: 17
tRP: 17
tRAS: 39
tRC: 56.

The mother board reads after XMP enabled:
CL:17
tRCD: 21
tRP: 21
tRAS: 39
tRC: 85

with a voltage of 1.35v

When checking memory speed on the display on the bios it reads 2400MHz, but when going into advanced it reads it as 3600MHz

My Motherboard is the Rog Strix B450-E
CPU: Ryzen 7 3800x
GPU: NVIDIA GeForce RTX 2080
Power supply: RM850x Gold

 

[altVortex]

Could be that the ram is in the wrong slot?

https://imgur.com/kh2UTBN

View: https://imgur.com/kh2UTBN

 

[Calvin7]

It appears you don't have a 32GB Kit, but are using multiple kits. The use of multiple kits have no guarantee to be compatible together. XMP profiles are for one kit not two.

You can play around with settings, try running at a slower speed.

 

[Arngren]

Could be that the ram is in the wrong slot?

https://imgur.com/kh2UTBN

View: https://imgur.com/kh2UTBN

no i have installed them in the same spots as i had the last ones. i upgraded from 3200mhz to 3600mhz so it should be the same.

 

[Arngren]

It appears you don't have a 32GB Kit, but are using multiple kits. The use of multiple kits have no guarantee to be compatible together. XMP profiles are for one kit not two.

You can play around with settings, try running at a slower speed.

i am only using Hyperx Fury in my build right now. i just got them and swapped them with the ones i had there from before.

 

[Arngren]

i just managed to make it work with resetting the motherboard. thanks for the help any way
THIS DIDN'T work. it seems if i restart the computer after making it work with restarting the bios. it resets it self to 2400mhz.

 

[Arngren]

i think i found the problem. it seems as if i dont have enough power, when i sat the mhz down i worked fine.

 

[drivinfast247]

Try raising the DRAM voltage until stable.

 

[Arngren]

Try raising the DRAM voltage until stable.

i found it to be stable at 3333MHz with a voltage of 1.30v