HyperX Fury two sticks of 16gb, CL14 and CL15

rorschach123

Reputable
Apr 22, 2018
8
0
4,510
Hey guys,

I have the following situation, I am using one stick of 16gb HyperX Fury at CL14, model here: https://www.kingston.com/datasheets/HX421C14FB_16.pdf. I am not doing any OC, so the frequency is staying stock.

I now have an opportunity to buy an extra stick at around 100 EUR, the only issue is that it's this model: https://www.kingston.com/dataSheets/HX424C15FB_16.pdf, at CL15.

Do you think they will work together? I've tried in the past putting a Corsair stick of 16gb without success, them being different latency and all.

Thank you for every advice!
 
Solution
Well they do have the same JEDEC Spec of DDR4-2133 CL14-14-14 @1.2V

So if you can manually set the speed and timings to that then they might work. But that's still just a maybe.