Question I’m having display issues on my xbox one x

[Tylerelvin13]

my xbox doesn’t show any display or shows it for 10-20 seconds before turning off then turning back on again and due to that happening it’s made my hp v28 4k monitor (if I’m right) stop working for everything I have opened up the xbox to see if it’s anything with a connection to the hdmi but a cable that’s like a ribbon cable that has two screws into it was missing part that’s soldered (I have made keyboards so I’m hoping it’s the same situation) is off and slightly damaged i don’t know what that cable does and if that’s what has caused the issue I have tried multiple different hdmi cables power cables and what not and it still doesn’t work any help to know if it is genuinely broken would be appreciated.

 

[TerryLaze]

A picture would make it much easier to understand what you are even talking about.
You can upload to imgurl and link it here.

But yeah, if you have a broken ribbon cable then it can only be a problem.

 

[Tylerelvin13]

That should be the image of the cable it’s the silver bit with 2 screws
I checked the cable name it’s a 94V-OD-5 cable

 

[TerryLaze]

That cable is for the power on switch and the front usb so ... maybe it's the fault?!
If the damage created a short between the two wires that turn on the console then it would be like having the button pressed all the time which would turn the system on but then make it force shut down again.

 

[Tylerelvin13]

That cable is for the power on switch and the front usb so ... maybe it's the fault?!
If the damage created a short between the two wires that turn on the console then it would be like having the button pressed all the time which would turn the system on but then make it force shut down again.

I’ve opened up the xbox and it’s not it’s the part you press to connect the controller so thinking it’s not possibly it