Question I accidentally overclocked my on-board GPU, now no display

[MarkoTheKid]

Hello Guys.




I accidentally overclocked my on-board GPU on my GIGABYTE ga78lmt-usb3 rev 6.0. The machine said continue or enter the bios and I choose to enter the bios and BAM. No display. Please help!

 

[TommyTwoTone66]

Whoops, my finger slipped and I accidentally overclocked my on board graphics! 😅

take the battery out of the motherboard for about an hour. That should reset it to default settings.

 

[MarkoTheKid]

Whoops, my finger slipped and I accidentally overclocked my on board graphics! 😅

take the battery out of the motherboard for about an hour. That should reset it to default settings.

I tried that bout not for an hour. I will try that. Anyways thank you. My board has dualbios too.

 

[TommyTwoTone66]

I tried that bout not for an hour. I will try that. Anyways thank you. My board has dualbios too.

Try booting into the second bios

 

[MarkoTheKid]

Try booting into the second bios

IDK how. Send me a link about it.

 

[TommyTwoTone66]

IDK how. Send me a link about it.

https://lmgtfy.app/?q=ga78lmt-usb3+rev+6.0+user+manual

 

[MarkoTheKid]

https://lmgtfy.app/?q=ga78lmt-usb3+rev+6.0+user+manual

I will take a look at it.

 

[MarkoTheKid]

I will take a look at it.

https://lmgtfy.app/?q=ga78lmt-usb3+rev+6.0+user+manual

It doesn't show how to boot to second bios.

 

[Deleted member 14196]

I don’t think you boot from it. use the second one to reflash the first
just look up how to recover your bios on a dual bios mobo

 

[Deleted member 14196]

Here are the instructions that will allow you to recover your bios from the secondary one

https://superuser.com/questions/114...o-boot-in-the-backup-bios-by-shorting-pins-on

 

[MarkoTheKid]

I went to the repair shopp. they changed bios chip and nothing has changed... I think the north bridge is heating up..

 

[SkyNetRising]

I went to the repair shopp. they changed bios chip and nothing has changed... I think the north bridge is heating up..

If you overclocked iGPU too aggressively, then it's probably fried.
Get a new motherboard. On this board iGPU is built into motherboard chipset (not like in modern computers - in CPU).
Refrain from overclocking next time.