Albert_4 :
DonkeyOatie :
Albert_4 :
DonkeyOatie :
You voltages and clocks look OK, but your temps are higher than I would like and your fan speed is at max. It is possible that your CPU cooler is not installed properly, or the thermal paste has failed in some way.
So its a cpu problem? what can i do to fix it?but according to syked3 its a chip on the motherboard?
If your CPU cooler is not performing properly, due to installation or thermal paste fault, it will not cool the CPU as well as it should and the resulting heat will warm up everything nearby. This is an easy possibility to check and fix and it will either fix the problem, or we can eliminate if from our list of possibilities. This does not mean that there is something wrong with the CPU.
Another possibility is overheating VRM (voltage regulators) on your motherboard.
The motherboard you are using is less robust that I would want to use for a FX6XXX with very light power phases and minimal VRM. The load of your CPU could be stressing these and overheating, but we work one step at a time, eliminating the easy and obvious first.
Thanks for the reply and explanation,i ordered a liquid cooler , see if it will solve the problem.
I would not advise that. There is no point throwing money at a problem until you know what the problem is!
If the problem is with the cooler, then just re-installing it will be a fix, perhaps. Liquid coolers are not inherently 'better' than air coolers, they just work differently and have some advantages and some drawbacks.
In particular, you are running a more powerful chip on this motherboard than I consider reasonable. This can cause parts of your motherboard, like the VRMs (which regulate the voltage to the CPU and other parts) to overheat. A 'top-down' cooler like the RAIJINTEK Pallas, or the Noctua NH C142 or the Xigmatek Janus, cools your CPU well ,and the air it pulls through can also help cool your VRMs. When you put in a radiator for a liquid cooler, it move the cooling effect elsewhere and will actually reduce the cooling of your motherboard.
You need to work out where the high temperatures are and what their cause is before taking action, which might make things worse.