Question I built my pc for the first time but the fans don't work

[Yadomi]

So i built my first pc turned it on it worked but the fans weren't working

https://imgur.com/a/V8n5cjh

View: https://imgur.com/a/V8n5cjh


Im thinking it might be a problem in these cables because i dont where they go.

Someone please help me quick.

 

[COLGeek]

The large connector provides power for the device. Connect it and the fans should work.

The two smaller ones are for LEDs.

 

[Zerk2012]

So i built my first pc turned it on it worked but the fans weren't working

https://imgur.com/a/V8n5cjh

View: https://imgur.com/a/V8n5cjh


Im thinking it might be a problem in these cables because i dont where they go.

Someone please help me quick.

The big connector is a Molex from the power supply for the power. The LED SW connects to the reset switch on the case, the other is a 3 pin connector that would go to a 3 pin motherboard LED connector.

 

[Yadomi]

The big connector is a Molex from the power supply for the power. The LED SW connects to the reset switch on the case, the other is a 3 pin connector that would go to a 3 pin motherboard LED connector.

But my motherboard doesnt have a thing to connect that 3 pin thing

 

[Yadomi]

The large connector provides power for the device. Connect it and the fans should work.

The two smaller ones are for LEDs.

How do i connect the large one cuz my psu doesnt have the male one

 

[Zerk2012]

How do i connect the large one cuz my psu doesnt have the male one

Post a link for the motherboard, case, and that controller.

 

[Yadomi]

Post a link for the motherboard, case, and that controller.

https://pcpartpicker.com/product/wx...-v3-micro-atx-lga1200-motherboard-h410m-s2-v3
Here is the motherboard and i picked up the local brand here in turkey locally so i couldnt find it

 

[Yadomi]

https://pcpartpicker.com/product/wx...-v3-micro-atx-lga1200-motherboard-h410m-s2-v3
Here is the motherboard and i picked up the local brand here in turkey locally so i couldnt find it

I forgot to type case i got the case locally

 

[Zerk2012]

I forgot to type case i got the case locally

your board don't have the 3 pin connector so you will need to hookk the LED SW to the case reset switch and use that to change colors, still need a link to the controller you have.

You don't have the box for the case still?

 

[Yadomi]

your board don't have the 3 pin connector so you will need to hookk the LED SW to the case reset switch and use that to change colors, still need a link to the controller you have.

You don't have the box for the case still?

What controller are you talking about
And here is the image of the case box

https://imgur.com/a/IlGnBR9

View: https://imgur.com/a/IlGnBR9

 

[Yadomi]

your board don't have the 3 pin connector so you will need to hookk the LED SW to the case reset switch and use that to change colors, still need a link to the controller you have.

You don't have the box for the case still?

So if i put the led sw in the reset sw slot i wont have to plug in the 3 pin?
And also my psu doesnt have the male molex connector so how do i connect my fans

 

[Zerk2012]

So if i put the led sw in the reset sw slot i wont have to plug in the 3 pin?
And also my psu doesnt have the male molex connector so how do i connect my fans

You need to find what parts you used!!!!!

The reset switch on the case should change the LED's not the motherboard and without more information nothing I can help you with.

Read the manual that came with it.

 

[COLGeek]

You need a SATA to Molex adapter or the Molex cable that shipped with your PSU.

 

[Yadomi]

You need a SATA to Molex adapter or the Molex cable that shipped with your PSU.

My psu and the fan cables both of those are the same so i am unable to connect them together.
Also can i ignore the 3 pin and if not just tell me because im in a hurry

 

[Yadomi]

You need a SATA to Molex adapter or the Molex cable that shipped with your PSU.

And if i get the sata to molex adaptor where do i plug the sata

 

[COLGeek]

And if i get the sata to molex adaptor where do i plug the sata

You must provide power to your fan controller. That comes from the PSU where you attach the proper adapter to an existing connection or install the proper cable directly to your PSU.

Without power, the LED connections don't matter.

 

[Yadomi]

How in detail should i attach the sata to my psu because i dont see anyway of that being possible as you can see here

https://imgur.com/a/DUYeV1j

View: https://imgur.com/a/DUYeV1j

 

[Yadomi]

https://imgur.com/a/J5vhv4p

View: https://imgur.com/a/J5vhv4p

Can i use this possibly?