I cannot locate RAM Memory modules inside Packard Bell iMEDIA S 2984

[ROBERT_147]

I wish to upgrade Ram memory from 4GB to 8GB in iMEDIA S 2984,however looking inside case to check if I have 1x4GB or 2x2GB modules I cannot find them. There is one white clip on its own simular to the ones normaly found each end of modules but no modulars ,unless they are very small.Everything in this case seems small compared to my last desktop.I did increase memory in that computer with no trouble but I am lost with this one.Any help will be greatly appriciated,as I must confess I am A complete amateur with computers.
Many Thanks

 

[Someone Somewhere]

Pics?

 

[utroz]

It does not use regular Desktop type RAM, it uses SO-DIMMS (Laptop memory) Specifically 1600Mhz DDR3L SODIMMs running at 1.35V
https://en.wikipedia.org/wiki/SO-DIMM

 

[ROBERT_147]

It does not use regular Desktop type RAM, it uses SO-DIMMS (Laptop memory) Specifically 1600Mhz DDR3L SODIMMs running at 1.35V
https://en.wikipedia.org/wiki/SO-DIMM

 

[ROBERT_147]

Thank you very much I will look inside to-morrow, your answer makes sense.Much appricieted.

ROBERT147

 

[ROBERT_147]

It does not use regular Desktop type RAM, it uses SO-DIMMS (Laptop memory) Specifically 1600Mhz DDR3L SODIMMs running at 1.35V
https://en.wikipedia.org/wiki/SO-DIMM

 

[ROBERT_147]

Dear utroz,
Opened cabinet,every thing as you said,just one more qeestion,will new 4GB module just slide behind original one,or do I have to remove this one first. Once more thanks for your advice.
BORDER 147

 

[utroz]

There should be room for two modules kinda right on top of each other. Usually the RAM would be in the bottom slot first leaving the top slot open for upgrades.

 

[ROBERT_147]

There should be room for two modules kinda right on top of each other. Usually the RAM would be in the bottom slot first leaving the top slot open for upgrades.

 

[ROBERT_147]

There should be room for two modules kinda right on top of each other. Usually the RAM would be in the bottom slot first leaving the top slot open for upgrades.

 

[ROBERT_147]

Once more many thanks, just waiting for module to arrive, then I can fit.
BORDER 147