Question I cannot possible solve this issue with my broke pc.

Dec 24, 2019
5
0
10
0
My pc broke a little while back (custom built) because it stopped giving any response , not even a blank screen. So I replaced the PSU , my ram and motherboard but it didn't work. I then used and old graphics card and it's cpu with the theist of my parts and it worked so I assumed it was the cpu. I have now replaced every part of my pc and it's still not giving any response at all. The only response is that if I unplug my hdmi it says "loose or no cable" instead of "no signal. I have changed wires, monitors but to no avail. I have used different plugs as well.

If anyone has the same issue or knows any possible fixes it would be a great help.
 
Dec 24, 2019
5
0
10
0
As a generic starting point have you gone through the POST sticky?
https://forums.tomshardware.com/threads/perform-these-steps-before-posting-about-post-boot-no-video-problems.1285536/

You may need to clarify the specs of the PC you're trying to get to work, and the specs of the old graphics card and CPU which made a functioning PC.
I've tried about everything on there but it hasn't worked.

My old specs were a 1050ti , a i5 3340 and 8g ddr3 ra
As a generic starting point have you gone through the POST sticky?
https://forums.tomshardware.com/threads/perform-these-steps-before-posting-about-post-boot-no-video-problems.1285536/

You may need to clarify the specs of the PC you're trying to get to work, and the specs of the old graphics card and CPU which made a functioning PC.
thanks so much, one stick of ram worked. Not sure why though
 

Oussebon

Upstanding
Feb 17, 2020
269
50
240
6
What is the full spec of your PC? Currently

And the RAM you have in it. Is it from the same kit, or were they two sticks of similar/identical looking RAM purchased separately?
 

ASK THE COMMUNITY

TRENDING THREADS