Question I cant find a molex cable for my Power Supply

[mcnevin75]

So I bought a new case and I need to power the fan with a 4-pin molex connector. My power supply does not have one, I was wondering if anyone could link me to a 4-pin molex connector that I can connect to my power supply and to my fan.

 

[jonnyguru]

So I bought a new case and I need to power the fan with a 4-pin molex connector. My power supply does not have one, I was wondering if anyone could link me to a 4-pin molex connector that I can connect to my power supply and to my fan.

What power supply do you have?

Modular cables are not "universal".

 

[R_1]

you need a SATA to Molex adapter, SATA is the replacement for the Molex standard and the power requirements are the same.
example only not an endorsement, shop around.
https://www.newegg.com/startech-com...ta&cm_re=molex_to sata-_-12-400-505-_-Product

updated with the proper gender adapter, oops

 

[jonnyguru]

you need a SATA to Molex adapter, SATA is the replacement for the Molex standard and the power requirements are the same.
example only not an endorsement, shop around.
https://www.newegg.com/startech-com...ta&cm_re=molex_to sata-_-12-400-505-_-Product

updated with the proper gender adapter, oops

Molex and SATA still coexist.

 

[R_1]

yes but not every new PSU has molex connectors.
its this case that I am referring to.
op has no molex I posit it shipped with none, adapt the proper cable.

I added the link with the picture for verification that we are talking Molex, not a fan 4 pin header.

 

[jonnyguru]

yes but not every new PSU has molex connectors.
its this case that I am referring to.
op has no molex I posit it shipped with none, adapt the proper cable.

I added the link with the picture for verification that we are talking Molex, not a fan 4 pin header.

Unless it's an HP or a Dell or some other mass produced pre-build, I have no idea what you're talking about. Every DIY PSU has both Molex and SATA.

Which is why I asked OP: "What power supply do you have?"

 

[King_V]

I wound up using a molex-to-SATA adapter for my son's fans because I didn't want to have to connect (with a modular PSU) both a long 4-SATA cable and a long 4-Molex cable. Lots of extra clutter.