Hello, I really need help.
First of all sorry for my grammar, english is not my first language.
Yesterday i was building PC, i got everything into my motherboard and wanted to test if it gonna boot to a BIOS, sadly didnt. Then i was reading a forum and I found that ez debug light was lighting a BOOT notification, so I wanted to bios flash. I was reading few hours how to do this on this motherboard, I was already doing this couple of times on my old PC so i was familiar with it. First I was doing it while my components were on the motherboard, the board was working, the PSU was spinning, there was a light on a board but red diod was blinking like 15min each time i was trying diffrent sticks.
There was all the time the same, the red diod was blinking more than a 10min, no progress, then i was turning off a PSU and trying to format the sticks in the diffrent ways and I was trying diffrent a versions of a BIOS. Then I was reading more about it, I disconnected all of the components from the motherboard, and first time after this, there was again like this, the PSU turned on, the light was blinking really quick for like +20min and nothing happens.
Then i disconected PSU and was trying again diffrent stick, even diffrent format system (FAT instend of FAT32). And now, the motherboard doesnt recognise any of the sticks (ofc i formated them later to the FAT32). The light is just blinking normally (not quick) and the PSU doesnt want to turn on when i hit the flash buttom. When i just click start bottom, the motherboard is working, PSU turning on instantly and the CPU light is on (there are no components on board). I was restarting CMOS battery multiple of the times. I really dont know what I can do to fix it. I will be extreamy greateful if somebody help me.
My spec
Msi B500-A Pro
Be quiet 550W
Ryzen 5600
Gtx 970 (just to check on the begin)
1TB MSI Mv2
2x8gb lexar RAM DDR4
First of all sorry for my grammar, english is not my first language.
Yesterday i was building PC, i got everything into my motherboard and wanted to test if it gonna boot to a BIOS, sadly didnt. Then i was reading a forum and I found that ez debug light was lighting a BOOT notification, so I wanted to bios flash. I was reading few hours how to do this on this motherboard, I was already doing this couple of times on my old PC so i was familiar with it. First I was doing it while my components were on the motherboard, the board was working, the PSU was spinning, there was a light on a board but red diod was blinking like 15min each time i was trying diffrent sticks.
There was all the time the same, the red diod was blinking more than a 10min, no progress, then i was turning off a PSU and trying to format the sticks in the diffrent ways and I was trying diffrent a versions of a BIOS. Then I was reading more about it, I disconnected all of the components from the motherboard, and first time after this, there was again like this, the PSU turned on, the light was blinking really quick for like +20min and nothing happens.
Then i disconected PSU and was trying again diffrent stick, even diffrent format system (FAT instend of FAT32). And now, the motherboard doesnt recognise any of the sticks (ofc i formated them later to the FAT32). The light is just blinking normally (not quick) and the PSU doesnt want to turn on when i hit the flash buttom. When i just click start bottom, the motherboard is working, PSU turning on instantly and the CPU light is on (there are no components on board). I was restarting CMOS battery multiple of the times. I really dont know what I can do to fix it. I will be extreamy greateful if somebody help me.
My spec
Msi B500-A Pro
Be quiet 550W
Ryzen 5600
Gtx 970 (just to check on the begin)
1TB MSI Mv2
2x8gb lexar RAM DDR4